Hytera DS-9300 - Alarm Status

User Manual Appendix: Parameters
51
Channel Switch
 0: Disable
 1: Enable
/
Alarm Status
Parameter Configuration
Master-Slave Monitoring Link Fault Alarm Enable
 0: Disable
 1: Enable
Power Supply Disconnection Alarm Enable
 0: Disable
 1: Enable
Power Supply Fault Alarm Enable
 0: Disable
 1: Enable
Downlink Input Over-power Alarm Enable
 0: Disable
 1: Enable
Uplink Output Over-power Alarm Enable
 0: Disable
 1: Enable
Uplink Local Oscillator Unlock Alarm Enable
 0: Disable
 1: Enable
Downlink Local Oscillator Unlock Alarm Enable
 0: Disable
 1: Enable
Remote Digital Module Fault Alarm Enable
 0: Disable
 1: Enable
Downlink LNA Fault Alarm Enable
 0: Disable
 1: Enable
Optical Receiving Alarm Enable
 0: Disable
 1: Enable
Optical Transmission Alarm Enable
 0: Disable
 1: Enable
Downlink PA Over-current Alarm Enable  0: Disable