4.6 Select the Zone
You can select a zone through the Palm Microphone.
On the home screen, press key to locate the cursor to the zone No., and then press the or key.
Press the preprogrammed
Zone Up
or
Zone Down
key.
4.7 Select the Channel
You can select a channel through the Palm Microphone. By default, you can switch to a channel only in the current
zone. Only with Cross-Zone Switch enabled, you can switch to a channel in another zone.
On the home screen, press key to locate the cursor to the channel No., and then press the or key.
Press the preprogrammed
Channel Up
or
Channel Down
key.
To direct to the preset channel, press the preprogrammed
Preset Channel
key.