7. Basic Settings
7.1 Power Level
To adjust the power level to high or low, press the preprogrammed
Power Level
Adjust
key.
7.2 Audio
7.2.1 Microphone and Speaker
The HM652 features no microphone or speaker, so you need to connect an audio accessory to the HM65X.
You can switch the audio modes of the microphone and speaker only when you connect the following accessories
to the HM652 simultaneously:
Palm Microphone (connected to the aviation port)
Optional audio accessory (connected to the accessory connector)
Microphone
When you transmit voice through the
PTT
key on the Palm
Microphone, the HM652 uses the microphone on the Palm
Microphone.
When you transmit voice through the optional audio accessory, the
HM652 uses the microphone on the optional audio accessory.
Press the
preprogrammed
Mic
Set Switch
key.
The HM652 uses only the microphone on the Palm Microphone.
The HM652 uses only the microphone on the optional audio accessory.
Speaker
The HM652 uses only the speaker on the Palm Microphone.
Press the
preprogrammed
SPK
Set Switch
key.
The HM652 uses only the speaker on the optional audio accessory.
When the optional audio accessory is connected, the HM652 uses
the speaker on the optional audio accessory. Otherwise, the HM652
uses the speaker on the Palm Microphone.