Hytera HM782 - Page 27

21
Through Manual Dialing
If the radio is connected to the palm microphone with keypad, do either of the following:

With the private call dial permission enabled by your dealer, on the home screen, enter the private ID, select Private
ID, and then press and hold the PTT key.

With the Keypad Mode feature enabled by your dealer, go to Menu > Settings > Basic Settings > Keypad Mode,
and then select On. On the home screen, enter the private ID, select Private ID, and then press and hold the PTT
key.
The private ID must be complied with the dialing rules. For details, consult your dealer.
Through Call Logs
Go to Menu > Call Logs, and then select the private call record.
Press and hold the PTT key.
Through One Touch Call/Menu
With the One Touch Call/Menu feature enabled, press the preprogrammed One Touch Call/Menu key, and then press
and hold the PTT key.
6.2.1.2 Trunking Mode
Through Preset Contact
Press and then rotate the Smart knob to select the private contact.
Press the PTT key.
Through Contact List
Do either of the following:

Press the Back/Subgroup key or the preprogrammed Current Subgroup Contact or Contact List key.

Go to Menu > Contact > Favorite/Private.
Select the private contact.
Press the P5/Answer key on the radio, or press the Answer key or the PTT key on the palm microphone.
Through Manual Dialing
On the home screen, enter the private ID through the keypad on the palm microphone.
Do either of the following:

Press the P5/Answer key on the radio.

Press the Answer key, , or the PTT key on the palm microphone.