Hytera HM782 - Selecting the Positioning System; Viewing the Position; Sending a Position Message; Call Location

43

In trunking mode, this feature is enabled by your dealer.
8.5.2 Selecting the Positioning System
The radio supports positioning systems including GPS, BDS/GLONASS, and BDS/GLONASS+GPS. To select the
positioning system, go to Menu > GPS > Position Sys.
This feature applies only to radios with BDS or GLONASS.
8.5.3 Viewing the Position
8.5.3.1 Viewing the Local Position
Go to the Menu > GPS > Position, and then press the OK/Menu key to view the position information of your radio
(including longitude, latitude, time, date, and the number of satellites).
8.5.3.2 Viewing the Contact Position

In conventional mode, go to Menu > GPS > Query Location, and then press the OK/Menu key to view the
location information of a nearby private contact (including alias, direction, and distance).

In trunking mode, go to Menu > GPS > Query Neighbors, and then press the OK/Menu key to view the
location information of a nearby private or group contact (including alias, direction, and distance).
8.5.4 Sending a Position Message

In conventional mode, you can send a position message to a contact. Do as follows:
1. Go to Menu > GPS > Position > GPS Msg.
2. Press the OK/Menu key to enter the contact list, and then select the contact.
3. Press the OK/Menu key to send the message to the contact.

In trunking mode, you can send a position message to the dispatch station. Do as follows:
1. Go to Menu > GPS > Msg with Position.
2. Press the OK/Menu key to edit the message.
3. Press the OK/Menu key to send the message.
8.5.5 Call Location
During a call, if the transmitting radio is enabled with the Call Location feature, the receiving radio displays the
location information of the transmitting radio when receiving valid positioning data.