Hytera HM782 - Ending a Broadcast Call; Include Call (Trunking Only); Phone Call; Initiating a Phone Call

26
6.4.3 Ending a Broadcast Call
A broadcast call ends in any of the following cases:

The calling party presses the P6/End key or places the palm microphone back to the hanger.

The call duration preset by your dealer expires.

The base station signal is lost.

A preemptive or emergency call interrupts the call.

The calling party changes the contact with the Clear Down feature enabled.
6.5 Include Call (Trunking Only)
An include call is a special group call during which another group is invited during the call hang time. An include call
has the same Talk Priority and Clear Down feature as a group call.
The Include Call feature is enabled by your dealer.
For operations of initiating, receiving, or ending an include call, see 6.1 Group Call.
6.6 Phone Call
A phone call is a call made from the radio to a phone through a repeater after the repeater accesses the PSTN/PABX
system through a PSTN/PABX gateway.
6.6.1 Initiating a Phone Call
6.6.1.1 Conventional Mode
Through Contact List
Press the preprogrammed Contact List or Favorite Contact List key, or go to Menu > Contact/Favorite.
Select the phone contact.
Press and hold the PTT key.
Through Manual Dialing
With the phone call dial permission enabled by your dealer, do as follows:
On the home screen, enter the phone ID, and then select DTMF Dial.
Press and hold the PTT key.
The phone ID must be complied with the dialing rules. For details, consult your dealer.