35
With Phone enabled, you can call any PABX/PSTN contacts.
With Phone disabled, you can call only the PABX/PSTN contacts in the contact list or emergency
contact.
8.1.2.9 Call Divert (Trunking Only)
When the radio malfunctions or powers off, the Call Divert feature allows the radio to divert calls to a private or
PABX/PSTN contact to ensure communications.
Go to Call Settings > Call Divert.
Go to Divert ID, and then enter the ID.
Go to On/Off, and then press the OK/Menu key to enable or disable the feature.
8.1.3 Security
8.1.3.1 Power-on Password
This feature allows you to set the power-on password of the radio.
Go to Security Settings > Power on Password > On/Off.
Enter the password, and then confirm the password.
If the password is entered incorrectly for the preset consecutive times, the radio cannot be used normally.
Contact your dealer to reset the password.
8.1.3.2 Encrypt
The Encrypt feature provides end-to-end encryption for voice and data to protect them against eavesdropping.
Enabling or Disabling the Encrypt Feature
If the radio is configured with this feature, you can enable or disable it in either of the following ways:
Go to Security > Encrypt > On/Off, and then press the OK/Menu key.
Press the preprogrammed Encrypt key.
In conventional mode, the Encrypt feature is enabled for the current channel. When switching to the channel,
the radio automatically enables encryption.
Setting the Encrypt Feature
In conventional mode, you can add or select the encrypt key.
To Next Page
Loading...
Need help?
General
