Hytera HM782 - 6.4 Broadcast Call (Trunking Only)

23
 The calling or called party changes the contact with the Clear Down feature enabled.
6.3 All Call

Conventional mode
An all call is a call from an individual user to all the other users on the current digital channel.

Trunking mode
An all call is a call from an individual user to all the other users in the network.
An all call can be either of the following types:

Broadcast All Call: Only the calling party can transmit voice.

General All Call: Both the calling party and the called party can transmit voice.
To select the all call type, go to Menu > Settings > Call Settings > All Call, and then select Broadcast Call or
General Call.
The All Call feature is enabled by your dealer.
6.3.1 Initiating an All Call
6.3.1.1 Conventional Mode
Through Preset Contact
1. Press and then rotate the Smart knob to select the all call contact preset for the digital channel.
2. Press and hold the PTT key.
Through Contact List
1. Do either of the following:

Press the preprogrammed Contact List or Favorite Contact List key.

Go to Menu > Contact/Favorite.
2. Select the all call contact.
3. Press and hold the PTT key.
Through One Touch Call/Menu
With the One Touch Call/Menu feature enabled, press the preprogrammed One Touch Call/Menu key, and then press
and hold the PTT key.