Hytera HM782 - 6.7 Call on Analog Channel (Conventional Only)

27
6.6.1.2 Trunking Mode
Through Contact List
1. Press the preprogrammed Favorite Contact List key, or go to Menu > Favorite/Private.
2. Select the PSTN/PABX contact.
3. Press the P5/Answer key on the radio, or press the Answer key or the PTT key on the palm microphone.
Through Manual Dialing
On the home screen, enter the phone ID through the keypad on the palm microphone.
Select PSTN/PABX.
Do either of the following:

Press the P5/Answer key on the radio.

Press the Answer key, , or the PTT key on the palm microphone.
The phone ID must be complied with the dialing rules. For details, consult your dealer.
Through Call Logs
Do one of the following:

Go to Menu > Call Logs.

Press the preprogrammed BackDial Call or ReDial Call key.
Select the PSTN/PABX call record.
Press the P5/Answer key on the radio, or press the Answer key or the PTT key on the palm microphone.
Through One Touch Call/Menu
With the One Touch Call/Menu feature enabled, press the preprogrammed One Touch Call/Menu key.
6.6.2 Receiving a Phone Call

Conventional mode
When receiving a phone call, press the P5/Answer key (with the One-Key Connect feature enabled) or enter the
connect code to join the phone system. Then you can answer the phone call.

Trunking mode
When receiving a PSTN/PABX call, press the P5/Answer key on the radio, or press the Answer key or the PTT key
on the palm microphone within the preset time.