BT
l To derive optimal communication quality, it is
recommended to use the BT devices specified by
the Company.
l If other company’s BT earpieces are used, you
must use them with the wireless ring PTT of the
Company. Otherwise, transmission is
unavailable via the earpieces.
BT is a wireless technology that supports short-distance
communications and data exchange between devices. With
the built-in BT module, you can connect the terminal to a
BT device.
To enable the BT feature, press the preprogrammed BT
key, or go to
Menu
>
BT
, and then enable BT
.
The BT feature only applies to radios with BT.
Connecting to a BT Device
1. Turn on the BT device and enter the pairing status. For
detailed operations, refer to the corresponding
accessory manual.
2. On the home screen, press the Menu key, and then go
to Accessory > BT > Pairing to search for BT devices.
3. Select the required BT device in the device list, and
then accept the connection request.
8
Setting Visibility
After the BT feature is enabled, the radio waits for
connection. When waiting time expires, the radio enters the
standby state to save power and ensure the security of BT
connection. In this case, the radio is invisible to other BT
devices.
To respond to the BT connection request any time, you can
set the radio to be always visible after being turned on. To
set visibility, on the home screen, press the Menu key, go
to Accessory > BT
> Visibility, and then select On.
8
To Previous Page
Loading...
Need help?
General
