l The BS signal is lost.
l A preemptive or emergency call interrupts
the call.
l The calling or called party changes the
contact with the Clear Down Via Private
Switch feature enabled.
Call on Analog Channel
(Conventional Only)
Call without Signaling
On an analog channel without signaling, you can
initiate a call to all the other users on the channel. Do
as follows:
1. Rotate the Smart knob to select the channel.
2. Press and hold the PTT key.
Call with Signaling
On an analog channel with signaling, you can initiate
a call to a specific contact on the channel. Do as
follows:
1. Press the preprogrammed Contact List key, or
go to Menu > Contact > Favorite/Contact.
2. Select the contact.
3. Press and hold the PTT key or the
preprogrammed One Touch Call key.
Emergency Call
In case of an emergency, you can initiate an
emergency call to seek help from your companion or
the control centre. With the highest priority, the
emergency call can be initiated even when the radio
is transmitting or receiving.
This feature is configured and enabled by your
dealer. For details, refer to the User Manual.
Message Services
The radio can send and receive short messages.
l Text message: a message containing text or
number.
l Quick text message: a frequently used text
message that can be created, edited, and deleted.
l Status message (trunking only): a predefined code
that transfers the message content.
Sending a Message
To send a message, do as follows:
1. Go to Menu > Message > Msg New.
2. In the recipient field, enter the contact ID, and
then press to switch the contact type.
Alternatively, press the OK/Menu key to enter
the contact list, and then select the contact.
3. In the message content field, enter the message
content.
Alternatively, select Insert, and then insert a
quick text message or status message.
4. Select Send.
Replying to a Message
To reply to a message, do as follows:
1. Go to Menu > Message > Msg, and then select
the message.
2. Select Reply, and then enter the text content or
insert a quick text message or status message.
3. Select Send.
Managing a Message
Go to Menu > Message > Msg, select a message,
press the Up key, and then manage the message as
follows:
l To forward the message, select Forward, and
then add the contact.
l To resend the message, select Resend.
l To delete the message, select Delete.
l To delete all messages, select Delete All.
7