13
or Zone Down key.
Note: You dealer may designate the power-up zone and channel. If not, the radio will
enter the zone and channel last used.
Selecting a Channel
Press the Volume Control / Channel Selector knob to switch it to channel selection
mode (the radio displays the icon
), and then rotate the knob to select your desired
channel.
Alias of the current channel will appear on the standby screen.
Digital/Analog Switch
Each channel can be programmed as either analog channel or digital channel. If the
current zone includes both analog and digital channels, you may quickly switch between
digital and analog channels through the Volume Control / Channel Selector knob.
When switching from digital to analog mode, some features such as Message will be
unavailable.
Call
Transmitting a Private Call
You may transmit a Private Call through any of the following methods. When transmitting
a Private Call, the icon
will appear.
î Transmitting a call to the preset contact
In standby mode, pressing PTT key will transmit an individual call to the contact (a Private
Call number) preset for the current channel.
Note:
Your dealer may preset a contact for each digital channel. The preset contact could be a
To Next Page
Loading...
Need help?
General
