19
Editing Priority Channel
To set the selected channel as a non-priority or as a priority channel. If you are interested
in activities on a channel, you can set it as a priority channel, which will be scanned more
frequently than a non-priority channel.
Each scan list may contain two priority channels at most.
indicates priority channel 1,
and
indicates priority channel 2.
Deleting a Channel
To remove a channel from the active scan list. However, the first channel in the list can not
be deleted.
Zone
To access this item, press Menu key in idle mode and then select “Zone”.
After accessing this menu, press Up/Down key to select your desired zone, and then
press OK key to apply your selection.
Settings
To access this item, press Menu key in idle mode and then select “Settings”.
To Next Page
Loading...
Need help?
General
