25
Emergency Alarm with
Voice to Follow
In this mode, you can send alarm information by pressing the
programmed Emergency key. When icon
appears,
you can speak into the microphone, allowing your voice and
background noise to be transmitted automatically (you do not
need to hold down the PTT key).
Operation Methods for Analog Emergency
Emergency Alarm
Operation: Press the programmed Emergency key to send alarm information. The
mobile radio displays icon
and text information “Sending Alarm!”, with red LED
glowing. If “Local Emergency Alarm” is enabled via the programming software, an alarm
tone will sound.
Two methods are available for you to exit the Emergency mode:
1. Once the emergency cycles expire, the mobile radio will exit the Emergency mode
automatically.
2. Long press the programmed Emergency key.
Emergency Alarm with Call
Operation:
1. Press the programmed Emergency key to send alarm information. The mobile radio
displays icon
and text information “Sending Alarm!”, with red LED glowing. If
“Local Emergency Alarm” is enabled via the programming software, an alarm tone will
sound.
2. When icon
appears, you can speak into the microphone to make an
emergency call.
3. When icon appears, you can receive. And when a call is received, the icon
appears.
Two methods are available for you to exit the Emergency mode:
To Next Page
Loading...
