Basic Operations
Turning the Terminal On/Off
To turn the terminal on, hold down the Power On/Off key
until the terminal displays power-up screen.
To turn the terminal off, long press the Power On/Off key.
Adjusting the Volume
You may adjust the volume through the knob. Rotate
the knob clockwise to increase the volume, or counter-
clockwise to decrease the volume. Then press OK to save.
If the volume is adjusted during a call, press Back and the
volume will be saved.
Selecting a Talk Group
In the home screen, press the knob to switch to talk group
selection mode (the terminal displays the icon ). Then
rotate the knob to select your desired talk group, and
press OK to conrm. Name of the current talk group will
appear on the home screen.
Switching Operation Mode
The terminal can operate in either TMO or DMO mode. To
switch between these two modes, press on the home
screen to enter the Options menu, and select “TMO” or
“DMO”.
To Next Page
Loading...
