Speaker
Note: the number of times that you are allowed
to input wrong PIN or PUK code is programmable
through the programming software. When the
terminal is disabled, contact your dealer to
activate it. The default PIN code is 1234, and the
default PUK code is 12345678.
Change PIN Code
This option allows you to change the PIN code. Before
changing it, you need to enter the old PIN code correctly.
Reset All
This option allows you to restore all settings to default
values. To perform this operation, you need to input the
password (the default is 1234).
Others
This menu allows you to view some information saved in
your terminal. See the following gure for an overview of
this menu:
My Info
This option allows you to view some basic information
about the terminal, including MCC (Mobile Country Code),
Menu Navigation
Press Up or Down key to select a speaker, and then press
OK to conrm.
Security
PIN Code
To set PIN code On or Off, you will be required to input
the PIN code. The terminal will be locked when wrong PIN
code is entered up to the predened times. To unlock it,
you need to enter the right PUK code. Entry of the correct
PUK code will restore PIN code to the default value.
However, when wrong PUK code is entered up to the
predened times, the terminal will be disabled temporarily
and shows “Radio Disabled”.
To Next Page
Loading...
