11
Radio B can hold down the PTT key to talk when the LED indicator
glows orange and the radio displays the icon
If Radio B does not respond it, the radio will display appropriate
indications.
5. Radio A can receive the call without any operation. When
receiving, the LED indicator glows green and the radio displays the
icon
Radio A can hold down the PTT key to talk when the LED indicator
glows orange and the radio displays the icon
●
Contact List or Call Log
1. Radio A and Radio B select the same digital channel.
2. Radio A accesses the contact list via menu “Contact -> Contact
List”, “Contact -> Favorite Contact” or “Call Log -> Outgoing/
Incoming/Missed”.
3. Radio A presses the Up or Down key to select Radio B.
4. Radio A holds down the PTT key to initiate a call.
5. By holding down the PTT key, Radio A can talk to the microphone
when the LED indicator glows red and the radio displays the icon
6. Radio B can receive the call without any operation. When
receiving, the LED indicator glows green and the radio displays the
icon
Radio B can hold down the PTT key to talk when the LED indicator
Call Services
glows orange and the radio displays the icon
If Radio B does not respond it, the radio will display appropriate
indications.
7. Radio A can receive the call without any operation. When
receiving, the LED indicator glows green and the radio displays the
icon
Radio A can hold down the PTT key to talk when the LED indicator
glows orange and the radio displays the icon
The duration of LED indicator glowing orange (Call
Hang Time) is preset by your dealer. The call will end if
neither party talks before this duration expires.
Calling on Analog Channel (No Signaling)
On the analog channel without signaling, the calling operations are the
same as that on the digital channel. The difference is that the called
parties are all the users on the channel, rather than the preset contact for
the channel.
Note
To Next Page
Loading...
Need help?
General
