15
Operation: Go to “Settings -> Device Info”.
One Touch Call
This feature allows you to make calls or send messages to the predened
contact easily. By pressing the programmed One Touch Call key, you
can make the following services:
●
To initiate group calls or send messages to the group call contact.
●
To initiate private calls or send messages to the private contact.
Operation
Service Operation
To initiate private calls or
group calls on the digital
channel.
Press the programmed One Touch
Call key and then hold down the PTT
key.
To send messages.
Press the programmed One Touch
Call key.
Time-Out-Timer
The feature is to prevent you from occupying a channel for an extended
period. If the TX time (60s preset by dealer) expires, the radio will
automatically terminate transmission and keep beeping. To stop beeping,
please release the PTT key. You must wait for a certain time period which
you can congure via the “TOT Re-key Time” menu before you can press
and hold down the PTT key to transmit again.
Transmission Management
This feature can prevent your radio from interfering with other
transmitting radios on the same channel. If you hold down the PTT key
while the channel is in use, your radio will keep beeping, alerting you to
transmission prohibition. It can be programmed via the CPS.
TX Admit on digital channel includes the followings:
●
Always Allow: You can hold down the PTT key to transmit all the time,
no matter whether the channel is being interfered or not.
●
Channel Free: The radio is allowed to transmit when the channel is
not being interfered.
●
Color Code Free: The radio can transmit only when the channel is not
being interfered or the color code is not matched.
TX Admit on analog channel includes the followings:
●
Always Allow: You can hold down the PTT key to transmit all the time,
no matter whether the channel is being interfered or not.
●
Channel Free: The radio is allowed to transmit when the channel is
not being interfered.
●
CTCSS/CDCSS Match: The radio is allowed to transmit when
CTCSS/CDCSS is matched.
●
CTCSS/CDCSS Mismatch: The radio is allowed to transmit when
CTCSS/CDCSS is mismatched.
Monitor
With the Monitor feature enabled, you can adjust the match conditions for
signal receiving.
Features and Operations