Hytera PD78XG System Planner

Hytera DMR System Planner
41
Scenario 2: The scan list contains both the digital channels and analog channels.
For example, CH1, CH3, CH5 and CH7 are digital channels, and CH2, CH4 and
CH6 are analog channels.
 If the Selected channel is an analog channel and refers to a channel different
from the other channels in the scan list, the channels in the scan list will be in
this order: Selected, CH2, CH4, CH6, CH1, CH3, CH5 and CH7.
 If the Selected channel is a digital channel and refers to a channel different from
the other channels in the scan list, the channels in the scan list will be in this
order: CH2, CH4, CH6, Selected, CH1, CH3, CH5 and CH7.
 If the Selected channel is a digital channel and refers to the same channel as
CH1 does, the channels in the scan list will be in this order:: CH2, CH4, CH6,
CH1, CH3, CH5 and CH7.
 If the Selected channel is an analog channel and refers to the same channel as
CH2 does, the channels in the scan list will be in this order: CH2, CH4, CH6,
CH1, CH3, CH5 and CH7.
The radio scans channels according to the channel order in the scan list. If the
channels in the scan list are in this order (Selected, CH2, CH4, CH6, CH1, CH3,
CH5 and CH7), the radio will scan channels in the order as shown below:
2.6.3.2 One Priority Scan Channel
Supposing only CH1 is set as the priority scan channel, the channels in the scan list
will be in this order (Selected, CH1, CH2, CH3, CH4, CH5, CH6 and CH7), no
matter whether they are analog channels or digital channels.
Then the radio will scan channels in the following order:

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English