Hytera PD78XG System Planner

Hytera DMR System Planner
113
3.4.3 Repeater Configuration
To get normal communications, you can configure following parameters via RDAC to
set the repeater in good performance.
Basic setting:
 Powering on
Designated power-up zone/channel
Designate power-on channel
Designate power-on zone
 Audio Priority
You can select one of the following priorities:
FCFS
Path Priority
Local PTT Priority
 Microphone
Set the value of the internal microphone gain.
Set the value of the external microphone gain.
 IP Multi-site Connect
Set the jitter buffer length
Set beacon duration
Set beacon interval
Set repeat request priority
Set access manager
Set start ID/end ID
Set CDCSS encoding and decoding frequency value

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English