Hytera PD78XG System Planner

Hytera DMR System Planner
84
For more details, please refer to the following files:
 Hytera DMR Application Protocol Specification
 Hytera DMR Application Programming Interface
 Hytera DMR ADK Development Guide
2.11.5 Data Transmission Service (DTP)
The ADK of Hytera data transmission is a simple data transmission protocol
achieved in the Hytera radio system. By the ADK of data transmission, Hytera
provides a data transmission channel based on UDP/IP. You can transmit
end-to-end data through this data channel and you can also develop your own data
transfer application using the ADK interface of Hytera data transmission to transmit
user data to a remote designated client. For example, you can transmit your files to
remote PC by this ADK platform.
Figure 2.11.5-1: Data Transmit Protocol Architecture
As the chart shows, the ADK of Hytera data transmission is achieved by
transmission channel based on UDP/IP. In the radio wireless network, reception and
sending of data transmission are running in the common air interface (CAI).
For more details, please refer to below files:
 Hytera DMR Application Protocol Specification
 Hytera DMR Application Programming Interface
 Hytera DMR ADK Development Guide
Please note that, this service is applicable only when the Dispatcher Station is
mobile, because when the Dispatcher Station is repeater, this can be achieved by IP
network.

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English