Hytera RD98 Series - Status Indication; LCD Icon; LED Indicator

66
Status Indication
LCD Icon
These icons may appear on LCD. They can help you easily identify
the repeater status.
Icon Name Icon Repeater Status
RSSI Indicator
More bars indicate better
signal strength;
TX Power
Indicator
Low TX power for the current
channel;
High TX power for the current
channel;
Scan Indicator
Scan is in progress;
Monitor Indicator
The Monitor feature is active.
Speaker Indicator
The speaker is unmuted.
Alarm Indicator
An alarm message is given.
Accessory
Indicator
DM An accessory is connected.
Scrambler/
Encrypt Indicator
TM
The Scrambler/Encrypt
feature is active.
Operation Mode
Indicator
RM
The repeater is operating in
Repeat mode;.
LED Indicator
LED Indicator Part No Repeater Status
Power indicator glows
green.
2 Normal power-on
Alarm indicator glows
red.
10 Abnormal operation
Repeater mode
indicator glows green
3
The repeater is operating in
Repeat mode
Repeater mode
indicator goes out.
3
The repeater is operating in
Base mode
Slot 1 TX indicator
glows red.
8
The repeater is transmitting on
an analog channel or on slot 1.
Slot 1 RX Indicator
glows green.
9
The repeater is receiving on an
analog channel or on slot 1.
Slot 2 TX indicator
glows red.
6
The repeater is transmitting on
slot 2.
Slot 2 RX Indicator
glows green.
5
The repeater is receiving on
slot 2.
Analog Mode Indicator
glows yellow.
4
The repeater is operating in
Analog mode
Digital Mode Indicator
glows blue.
7
The repeater is operating in
Digital mode