Hytera RD98 Series - Scan; Digital Speaker; Exit

99
3. Press this knob again to view details, as shown below.
In the above interface, you can rotate the Navigation knob to
scroll through related information. To exit and return to the main
menu, press the knob.
Scan
The Scan feature allows you to listen to communication activities
on other channels so that you can keep a close track of your team
members. You can request your dealer to create a scan list for
each channel. Each list may contain 32 channels at most.
To access this menu:
1. In the home screen, press the
NavigationNavigation
knob to enter the
main menu.
2. Rotate this knob to select the "Scan” option.
3. Press this knob again to access the “Scan on/off” interface.
In the above interface, you can enable or disable the Scan feature.
To exit and return to the main menu, press the knob.
Note: Note: If the “Scan” option is not checked in the
CPS by your dealer, you can not enable or disable
the Scan feature via this menu.
Digital Speaker
The Digital Speaker feature allows your repeater to receive audio
from a specifi c slot, or to mute for the digital channel.
To access this menu:
1. In the home screen, press the
NavigationNavigation
knob to enter the
main menu.
2. Rotate this knob to select the "Digital Speaker” option.
3. Press this knob again to access the “Digital Speaker” interface.
In the above interface, you can select a specifi c slot to receive, or
mute the speaker for the digital channel. To exit and return to the
main menu, press the knob.
Exit
To exit the main menu:
1. In the main menu, rotate the Navigation knob to select the
"Exit” option.
2. Press this knob to return to the home screen.