1414
Care and Cleaning
To guarantee optimal performance as well as a long service life of
the product, please follow the tips below.
Product Care
●
Keep the product at a place of good ventilation and heat
dissipation to facilitate normal work.
●
Do not place irrelevant articles on top of the product to ensure
optimal heat dissipation.
●
Do not pierce or scrape the product with any edged instruments
or hard objects.
●
Keep the product far away from substances that can corrode
the circuit.
●
Do not place the product in corrosive agents, solutions or
water.
Product Cleaning
Caution: Caution: Disconnect the power supply from the
repeater before cleaning.
●
Remove the dust and fine particles on the repeater surface
with a clean and dry lint-free cloth or a brush regularly.
●
Use a non-woven cloth with neutral cleanser to clean the keys,
control knobs, LCD and jacks after long-time use. Never use
chemical preparations such as stain removers, alcohol, sprays
or oil preparations. Make sure the product is completely dry
before use.
To Next Page
Loading...
