Hytera TC-508 - Disassembly and Assembly

TC-508 Service Manual
61
Disassembly and Assembly
Disassembling the Chassis
1. Remove the Antenna , the Channel Selector knob and Radio On①②-Off/Volume Control knob . ③
2. Use a spanner to remove the fixing nuts . ④
3. Unfasten the two screws by a screwdriver ⑤
4. Push the chassis upwards and then pull it out of the radio cover.
1
2
3
5
4
Figure 7
25°
Figure 8
Disassembling the Speaker
1. Loosen a screw to remove the fixing sheet of the speaker.
2. Remove the speaker;