Hytera X1p - User Manual

Other manuals for Hytera X1p

Owner's Manual29 pages

Quick Reference Manual2 pages

Questions and Answers

B
Benjamin RiveraSep 3, 2025
Why is the noise too loud on Hytera X1p Portable Radio?
- M
  markwrightSep 3, 2025
  If the noise is too loud on your Hytera Portable Radio, the signal may be poor, so make sure you and the group members are within the communication range. You may also be in an unfavorable location, such as blocked by high buildings or underground; move to an open and flat area, and restart the radio to try again. Another cause may be external disturbance (such as electromagnetic interference); stay away from equipment that may cause interference.
L
Linda GarciaSep 1, 2025
Why is the voice weak on my Hytera X1p Portable Radio?
- A
  Alexis EllisonSep 1, 2025
  If the voice during receiving on your Hytera Portable Radio is weak, discontinuous, or totally inactive, several factors could be responsible. The battery voltage might be low, so try recharging or replacing the battery. The volume level could also be set too low; increase it by rotating the Power On-Off/Volume Control Knob clockwise, or ask your dealer to disable the Digital MIC AGC feature. Ensure the antenna is securely attached by reattaching it after turning off the radio. Finally, the speaker may be blocked or damaged; clean the surface of the speaker, and if the issue persists, contact your dealer or authorized service center for inspection and repair.
Q
qcampbellAug 31, 2025
How to fix Hytera Portable Radio that fails to power on?
- G
  George HeathAug 31, 2025
  If your Hytera Portable Radio won't turn on, there are a few potential causes. First, the battery might not be properly installed; try removing it and reattaching it securely. Alternatively, the battery may be completely drained, so try recharging or replacing it with a charged battery. Lastly, the battery contacts could be dirty or damaged. Clean the contacts, and if the problem persists, it may require professional inspection and repair.
J
John PerezAug 29, 2025
Why GPS is not working on Hytera Two-Way Radio?
- S
  suzannesullivanAug 29, 2025
  If the GPS on your Hytera Two-Way Radio cannot locate your position, it may be because no GPS signal is being received. Move to an open and flat area, and restart the product.
J
jonesjessicaAug 27, 2025
Why am I hearing noise on my Hytera Two-Way Radio?
- D
  Dennis SharpAug 28, 2025
  If you're hearing irrelevant communication or noise on your Hytera Two-Way Radio channel, it could be due to interference from other products using the same frequency; change the frequency or adjust the squelch level. Alternatively, your product may be set with no signaling; set signaling for all member products to avoid interference at the same frequency.
B
Brent PetersenAug 26, 2025
What to do if the noise is too loud on Hytera Two-Way Radio?
- N
  Natalie JohnsonAug 26, 2025
  If the noise is too loud on your Hytera Two-Way Radio, you might be too far from other members; try moving closer. Also, your position could be unfavorable, such as being blocked by buildings or underground; move to an open and flat area and restart the product. External disturbances like electromagnetic interference can also cause this; stay away from equipment that may cause interference.
G
Gina GuerraAug 25, 2025
How to fix communication issues on Hytera Two-Way Radio?
- B
  bgarciaAug 25, 2025
  If you cannot communicate with other members using your Hytera Two-Way Radio, it could be due to inconsistent frequency or signaling; set your TX/RX frequency and signaling to match other members. Also, ensure all members are using the same channel type (digital/analog). Finally, you may be too far away from the group; move closer to other members.
J
Joel CopelandAug 22, 2025
Why is the voice weak on my Hytera Two-Way Radio?
- J
  Jesse RossAug 23, 2025
  If the voice is weak, discontinuous, or totally inactive when receiving signals on your Hytera Two-Way Radio, the battery strength may be too low, so recharge or replace the battery. Ensure the volume isn't set too low by increasing it. Also, check that the antenna is properly installed; power off the product and then reinstall the antenna. Finally, the speaker may be blocked or damaged; clean the speaker surface, and if that doesn't work, further inspection may be needed.

Hytera X1p Specifications

General

Zone Capacity	16
Operating Voltage	7.4 V
Keypad	Yes
Vocoder Type	AMBE+2
Audio Output Power	0.5 W
Storage Temperature	-40°C to +85°C
IP Rating	IP67
Bluetooth	Yes
Frequency Range	VHF: 136-174 MHz, UHF: 400-470 MHz
Channel Spacing	12.5/20/25 kHz
Battery	Li-Ion 2000 mAh
Display	LCD
Digital Protocol	DMR
RF Power Output	VHF: 5 W, UHF: 4 W
Operating Temperature	-30°C to +60°C
GPS	Yes

Summary

Preface

Model Applicability

States the manual is applicable to the X1p model.

Instructional Aids and Terminology

Instructional Icons Guide

Explains the meaning of alert and function icons used in the manual.

Key Term Explanations

Defines key operational terms and call types like Private Call, Group Call, All Call.

Copyright and Legal Notice

Copyright Information

Details Hytera's trademarks, product names, and intellectual property rights.

Disclaimer and Support Information

Manual Disclaimer

States the company's warranty, accuracy, and change policy for the manual.

User Feedback Channel

Provides the company website for user suggestions and more details.

FCC RF Exposure Compliance

RF Energy Awareness and Control

Provides essential information and instructions for RF energy awareness and compliance.

Federal Communications Commission Regulations

Explains FCC rules for 2-way radio marketing and user awareness for occupational use.

RF Exposure Standards and Guidelines

Compliance with RF Exposure Standards

Lists the RF energy exposure standards and guidelines Hytera's radios comply with.

RF Exposure Control Procedures

Outlines procedures for controlling RF exposure in occupational/controlled environments.

Regulatory Conformance

IC Statement

States compliance with Industry Canada licence-exempt RSS standards and SAR limits.

EU Regulatory Conformance

Confirms product compliance with essential requirements of the EU Directive 1999/5/EC.

Package Contents Verification

Items Included in the Package

Lists all items included in the radio package for user verification.

Product Overview and Controls

Radio Unit Controls Identification

Identifies and labels various physical controls and indicators on the radio unit.

Programmable Key Customization

Programmable Key Functions

Lists functions that can be assigned to programmable keys (SK and TK) for enhanced convenience.

Initial Setup: Battery Charging

Battery Charging Procedures

Details the steps and notes for charging the radio's battery correctly.

Charging Diagram

Illustrates the physical connection steps for charging the radio battery.

Charging Process and LED Indicators

Charging Procedures Steps

Step-by-step guide on connecting the charger and adapter for charging the device.

LED Indicator Meanings

Explains the meaning of different LED color and flashing patterns during charging.

Accessory Assembly: Antenna

Antenna Installation

Instructions on how to attach the antenna to the radio unit by turning it clockwise.

Accessory Assembly: Battery and Audio

Battery Installation Guide

Details the steps for inserting and securing the battery onto the radio.

Audio Accessory Connection

Instructions for connecting audio accessories to the radio's accessory jack.

Radio Status Indication

LED Indicator for Radio Status

Explains the meaning of the top LED indicator for different radio statuses like powering on, transmitting, receiving.

Basic Radio Operations

Powering the Radio On;Off

Instructions on how to power the radio unit on and off using the control knob.

Volume Adjustment

Details how to increase or decrease the call volume using the control knob.

Zone Selection Method

Explains how zones group channels and how to switch between them using programmable keys.

Channel Management and Bluetooth

Selecting a Channel

How to select a specific channel using the Channel Selector knob.

Channel Mode Switching

Explains switching between analog and digital channels via the Channel Selector knob.

Bluetooth Function Control

Instructions on how to activate or deactivate the Bluetooth function using the SK key.

Call Function Introduction

Call Operation Notes

Provides important notes regarding preset contacts and microphone usage for calls.

Call Operations

Private Call Procedures

How to initiate and respond to Private Calls.

Group Call Procedures

How to initiate and respond to Group Calls.

All Call Procedures

How to initiate and receive All Calls.

Analog Channel Call Operation

Describes how to transmit and receive calls on analog channels.

Operational Features: Power and Scan

Adjust Power Level Feature

How to switch between high and low power levels for battery saving or extended range.

Scan Feature Operation

Explains how to enable, use, and exit the scan feature to monitor other channels.

Operational Features: Talk Around and Monitor

Talk Around Feature

How to enable/disable communication when repeater malfunctions or is out of range.

Monitor Feature Operation

How to enable/disable the Monitor feature to adjust signal receiving conditions.

Operational Features: Squelch Control

Squelch Off Function

How to enable/disable the Squelch Off feature to keep the speaker unmuted.

Adjust Squelch Level

How to adjust the squelch threshold for unmuting the radio speaker.

Advanced Features: One Touch Call

One Touch Call Operation

How to use the One Touch Call key for various services on analog and digital channels.

Advanced Features: Telemetry and Roam

Telemetry Feature Usage

How to remotely supervise connected devices using the Telemetry feature.

Roam Feature Activation

How to enable/disable the Roam feature for communication in IP Multi-site Connect systems.

Emergency Feature Configuration

Emergency Type Options

Describes the four available Emergency Types: Siren Only, Regular, Silent, Silent with Voice.

Emergency ID Type Options

Explains the two Emergency ID Types: None and HDC1200 for signaling alarm information.

Emergency Mode Selection

Details the three Emergency Modes: Alarm, Alarm with Call, and Call Only for emergency operations.

Analog Emergency Operation Methods

Analog Alarm Emergency Operation

Operation steps for sending alarm information in Analog Alarm mode and exiting.

Analog Alarm with Call Operation

Operation steps for sending alarms and making calls in Analog Alarm with Call mode.

Emergency Operation Methods: Analog and Digital

Analog Call Only Emergency

Operation steps for making an emergency call in Analog Call Only mode.

Digital Emergency Operation Methods

Outlines operation methods for Alarm, Alarm with Call, and Call Only in Digital Emergency modes.

Digital Emergency Operations and Man Down

Digital Alarm with Call Operation

Steps for making an emergency call in Digital Alarm with Call mode.

Digital Call Only Emergency

Steps for making an emergency call in Digital Call Only mode.

Man Down Feature Operation

How to enable, use, and disable the Man Down feature for automatic alarming.

Safety and Security Features

Man Down Feature Exit and Behavior

Instructions on how to exit the Man Down feature and its behavior on power off.

Lone Worker Feature Operation

How to enable, use, and disable the Lone Worker feature for summoning help.

Scrambler;Encrypt Feature

How to enable/disable Scrambler/Encrypt to protect communication privacy.

Radio Status and System Features

Battery Strength Indicator

How to check the current battery strength using the indicator.

Busy Channel Lockout and TOT

Features to prevent interference and manage channel occupation time.

Advanced System Features

Covers Pseudo Trunking, MIC AGC, and Radio Registration Service.

GPS Revert and Troubleshooting

GPS Revert Functionality

Transfers positioning information to the system when required.

Troubleshooting Common Issues

Provides analysis and solutions for common product phenomena and issues.

Product Care and Maintenance

Product Care Guidelines

Tips for protecting the product from damage and corrosive substances.

Product Cleaning Instructions

Guidance on how to clean the product's surface, keys, and controls safely.

Related product manuals

Hytera PT580H Plus F4