1-12
6. RECOMMENDED LUBRICANTS
Use only oils listed below or equivalent.
Do not mix different brand oil.
Service point Kind of fluid Capacity˶ (U.S.
gal
)
Ambient temperatureĦC(ĦF)
Engine oil
pan
Engine oil
7.4
(2.0)
Torque
converter
transmission
Transmission
oil
10
(2.6)
Axle Gear oil
5.6
(1.48)
Hydraulic
tank
Hydraulic
oil
STD : 31 (8.2)
OPT : 38 (10)
Fuel tank Diesel fuel
48.2
(12.7)
Fitting
(Grease nipple)
Grease -
Brake
reservoir
tank
Brake oil
0.5
(0.13)
Radiator
Antifreeze : Water
9.4
(2.5)
SAE 30
SAE 10W
SAE 10W-30
MOBIL FLUID 424
SAE 15W-40
侏
ISO VG 15
ISO VG 46
ISO VG 68
侏
ASTM D975 NO.1
ASTM D975 NO.2
侏
NLGI NO.1
NLGI NO.2
Ethylene glycol base permanent type ( 50:50)
-50 -30 -20 -10 0 10 20 30 40
(-58) (-22) (-4) (14) (32) (50) (68) (86) (104)
#侏
#=#Cold region
Russia, CIS, Mongolia
侏
Ethylene glycol base permanent type (60 : 40)
侏
SAE 5W-40
SAE numbers given to engine oil should be selected according to ambient temperature.
For engine oil used in engine oil pan, use SAE 10W oil when the temperature at the time of
engine start up is below 0˚
C
, even if the ambient temperature in daytime is expected to rise
to 10˚C or more.
If any engine oil of API service class CF is used instead of class CH4 engine oil, the
frequency of oil change must be doubled.
Η
Θ
Ι
NOTES :
ATF DEXRON III
AZOLLA ZS32 (Hydraulic oil, ISO VG32)
侏
AZOLLA ZS10 (Hydraulic oil, ISO VG10)
To Next Page
Loading...
