2-8
Brake piping
Disconnect the brake piping from the
brake housing of drive axle.
When disconnecting the brake piping
When disconnecting the brake piping
and refilling the oil for the brake housing
and refilling the oil for the brake housing
of the drive axle take to extreme care
of the drive axle take to extreme care
not to spill it on the work site.
not to spill it on the work site.
It can cause to happen unexpected
It can cause to happen unexpected
accidents such as personal injury due
accidents such as personal injury due
to slippage on the oil or fire.
to slippage on the oil or fire.
If the oil is spilt on the work site, wipe it
If the oil is spilt on the work site, wipe it
off immediately.
(2)
Brake pipe
Brake valve
Drive axle
Parking brake cable
Disconnect parking brake cable from the
transmission.
It should be maintained at least 4
mm
of
the latching depth that the pawl of the
parking lever is hasped on the latch of the
cowl in order that it can prevent the
parking brake from unexpected releasing
problem of the parking operation.
(3)
※
Drive axle
Parking brake
cable
Parking brake
lever assy
Cowl
Pawl
Ratchet
4mm
20DFRE12
20DFRE13
To Next Page
Loading...
