I.CH Motion SS5 User Manual

©I.CH Motion® 2020
ichmo.com
Specifications subject to change without notice.
Owner's Guide: SS5 Stepper Servo Motor Driver
Page 3
TECHNICAL DOCUMENT
1. Introduction
Thanks for choosing the SS serial motor drive.The CL5 is a new digital step servo motor drive based on a 32-bit DSP with advanced control
algorithm.It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability.Motor self-test and parameter
auto-tunning technology offers optimum responses with different motors and easy-to-use. The motors can run with much smaller noise,less heat,
smoother movement.
2. Feature
 Brand new 32-bit DSP
 16 settings of microstep resolution
 Servo control algorithm, accurate speed position control and good responsiveness
 Minimize heat generation by adjusting current in real time based on load
 Auto Setuped motor parameters
 Step&Direction/CW&CCW pulse
 1Mhz digital filter for high speed inputs
 Self Test-the drive will perform a 2rev,3rps,CW/CCW move test

I.CH Motion SS5 Specifications

General

Brand	I.CH Motion
Model	SS5
Category	Control Unit
Language	English