EasyManua.ls Logo

I.E.M. Tel-O-Graph GSM - 5 Preparing the measurement; 5.1 Unpacking; 5.2 Inserting the batteries

I.E.M. Tel-O-Graph GSM
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparing the measurement
19
EN
5 Preparing the measurement
5.1 Unpacking
Note
All parts included in delivery package have been
properly packed and checked for completeness and
functionality. Should the product be incomplete,
damaged or defect, please inform your healthcare
provider immediately.
WARNING
Risk of strangulation from the cuff hose and blood
pressure cuff!
Keep the blood pressure cuff out of the reach
of children!
1) Unpack the entire delivery package and check
that everything is present.
2) Inspect the blood pressure monitor to ensure
there is no visible damage on the outside. If the
blood pressure monitor is damaged, have it
repaired before use.
3) Keep the packaging so that it can be safely
packaged at a later date.
5.2 Inserting the batteries
Fig. 4: Opening the battery cover
Note
Insert the batteries while holding the blood
pressure monitor in your hand.
Take care not to activate the button on the
front!
By pressing the button when inserting the
batteries, you will enter the pressure gauge
mode used for servicing purposes. Remove
the batteries and insert the batteries again.

Related product manuals