10 Maintenance
The monitor and the cuff are calibrated by the
manufacturer for a period of two years. Maintenance
(metrological check) must be carried out in accordance
with Directive 93/42/EEC every two years at the latest
if the device is used professionally. In certain
countries, this requirement may be regulated by
national laws or regulations.
The metrological check comes at an additional cost
and can be carried out in Germany by either I.E.M.
Industrielle Entwicklung Medizintechnik und
Vertriebsgesellschaft mbH (I.E.M GmbH), a competent
authority or by authorised maintenance services
corresponding to the "Medizinprodukte-Betreiber-
Verordnung" (Medical Product Operator Regulations).
To Next Page
Loading...
