Measuring blood pressure and pulse
24
4) Hold your arm so that the blood pressure cuff is
at the same height as your heart.
5) Relax your arm and turn the palm of your hand
to face upwards.
6) Place your feet flat on the floor and leave your
legs uncrossed.
The reading can be affected by the position of the
cuff, the patient
’
s correct posture and position,
physical exertion or the patient
’
s mental state.
Risk of injuries during measurement!
▪ Do not place the air hose around your neck.
▪ If you feel any pain during the measurement,
stop the measurement.
▪ Do not place the blood pressure cuff over
wounds.
1) Apply the blood pressure cuff and assume the
correct posture.
2) Press the
button.
The display shows the start screen
(Fig. 6).
3) Press the button again to start the
measurement.
The blood pressure monitor will confirm this with a
short acoustic signal and briefly displays the
display functions. The blood pressure cuff slowly
pumps up. The fitting pressure is displayed on the
display. After the initial pumping, there is
additional pumping. Once the blood pressure
To Next Page
Loading...
