I.E.M. Tel-O-Graph GSM - 15 Manufacturers EMC guidelines; Electromagnetic interference emissions

Manufacturer’s EMC guidelines
42
15 Manufacturer’s EMC guidelines
Electromagnetic interference emissions
The Tel-O-Graph
®
GSM is intended to be operated in the electromagnetic environment specified below. Only use
the Tel-O-Graph
®
GSM in such an environment.
Measurement of
interference emissions
Compliance
Electromagnetic environment – guidelines
HF interference
emissions according to
CISPR 11
Group 1
The Tel-O-Graph
®
GSM uses HF power exclusively for its
internal function. Its HF emission is therefore very low and it is
unlikely that any neighbouring electronic device will
experience any interference.
HF interference
emissions according to
CISPR 11
Class B
The Tel-O-Graph
®
GSM is suitable for use in facilities other
than residential areas and those directly connected to the
public supply network which also supplies buildings used for
residential purposes.
IEC 61000-3-2
Not applicable
IEC 61000-3-3
Not applicable