Transferring the measured values via mobile communications network
26
7 Transferring the measured values via
mobile communications network
If the blood pressure monitor is set up for transmission
of your measurement values via a mobile
communications network, the measurement values will
be automatically transferred to the database.
If previous measurement transmissions have not yet
been transferred, all data not yet sent will be sent
together.
The blood pressure monitor emits a short acoustic
signal to confirm successful transmission of the
reading.
▪ In case of problems with transmission errors,
please refer to chapter 12 "Error messages".
If there is still a transmission problem, please
contact your healthcare provider.
▪ In the event of transmission problems if there
are more than 15 readings, the oldest data is
overwritten by the new readings in the blood
pressure monitor.
To Next Page
Loading...
