24
25
V. Repeat the procedure for the second installation adapter.
VI. Manually screw the flex adapters with the thread into the
installation adapters and tighten them hand-tight (3Nm).
VII. Place I LOCK IT GPS over your mudguard | tire.
VIII. Screw I LOCK IT GPS to the threaded sockets of the
flex adapters by hand using an Allen key (3 Nm).
Use the mounting screws supplied with I LOCK IT GPS.
Take care not to screw the I LOCK IT GPS too tight. This
could lead to difficulties in moving the locking bar.
Check manually that the I LOCK IT GPS can be tilted back and forth.
The mudguard should not hinder the movement.
The protruding plastic straps of the installation
adapters can be removed with a side cutter.
FIRST SET-UP
3. OPERATION
3.1. UNLOCKING I LOCK IT
GPS
I LOCK IT GPS offers several ways to open:
AUTOMATIC UNLOCKING
If the automatic opening is activated in the settings, I LOCK IT
GPS will open automatically as soon as you get close to it. The
distance at which I LOCK IT will open can be configured in
different steps via the app.
The I LOCK IT app must be active on your smartphone in the
background and the Bluetooth functionality of your smartphone
must be switched on.
After successful opening, the I LOCK IT GPS button lights up
green and your journey can begin.
An automatic opening only takes place if
you have moved at least 5 m away from
your bike after closing by smartphone or button
or I LOCK IT GPS has closed automatically.
OPERATION
To Next Page
Loading...