I LOCK IT GPS - Acoustic Signals

42
43
• In the app you can select which I LOCK IT should
be connected to your smartphone. In addition,
individual configurations can be made.
• Your smartphone can only be connected to one
I LOCK IT at a time.
PAIR KEY FOB
+
Press the key fob
+
button.
The key fob
+
LED starts flashing blue.
As soon as the key fob
+
LED and the I LOCK IT GPS button
light up blue for 5 seconds, there is a connection
between key fob
+
and I LOCK IT GPS.
OPERATION
3.7. ACOUSTIC SIGNALS
WARNING SOUNDS
I LOCK IT GPS emits warning tones in various situations (such
as an unsuccessful unlocking or locking). These tones can be
activated and deactivated via the slider in the I LOCK IT app.
If the warning tones are deactivated, the I LOCK IT GPS button
will continue to flash red when a warning occurs, but there will
be no acoustic warning.
LOCKING SOUND
A short acoustic tone is sounded as information about an
imminent closure. This sound can be activated and deactivated
using the slider in the I LOCK IT app.
If this function is deactivated, then there is no acoustic signal
before a locking process.
For safety reasons, the sound cannot be
deactivated during automatic closing. If you
wish to lock without an acoustic confirmation,
we recommend locking by pressing the button
on I LOCK IT GPS or via app.
OPERATION