I-O DATA Soundgenic - Connecting to a Power Outlet

9
Install this Unit > Connecting to a Power Outlet
Connecting to a Power Outlet
Connect the included AC adapter to Soundgenic’s “DC IN 12V”
port, then connect the AC adapter to a power outlet.
(The power turns on when it is connected to a power outlet.)
Power outlet
DC IN 12V
Included AC adapter
Fit the cable hook
Using the cable hook
We recommend using the cable hook to avoid having the AC adapter
accidentally coming unplugged.
After tting the AC adapter cord into the cable hook, secure the cable
hook by tting it into the hole on the left side of the “DC IN 12V” port.
* Depending on the orientation of the cable hook, it may not t into the
hole properly.
Check that the cable hook is securely tted into the hole.