QUICK RESET
An easy way of returning the light to its default settings.
Before the light is given any power hold down both
both buttons on the left hand side of the interface.
Keep the buttons held down as you give the light power.
When you see screen with the black boxes let go of the buttons
and the next screen will appear. If you do not let go it will stay
locked until you let go.
Then the light will return to MODE 10 ADDR 001.
This is a fast way of readdressing a light, that will save you a few button presses.
ADDR 001
MODE10 36CH MORE
BB7 USERS MANUAL - PAGE 25
PRESS
PRESS
PRESS
PRESS
To Next Page
Loading...