IAV Light Speaker - Step 6 - Adjusting the Simple Tabs TM

15
Tech Support: (877) 591-2491
Step 6: Adjusting the SimpleTabs™.
Your LightSpeaker
®
is equipped with a unique mounting
system. The three SimpleTabs™, on the back of
the speaker can be rotated outward and when the
LightSpeaker
®
is pressed into the housing, hold it
centered and securely in place.
You will now adjust the Simple Tabs™ on the back of the
LightSpeaker
®
to either A (6” recessed light fixture) or B
(5” recessed light fixture).
If you are installing into a 5” recessed lighting fixture,
rotate each of the SimpleTabs™ out to position “B” on the
top of the LightSpeaker
®
unit.
SimpleTabs
TM
SimpleTabs
TM