41
Tech Support: (877) 591-2491
Troubleshooting the Remote
If your remote does not operate when any of the buttons
are pushed:
A) Check the batteries to be certain that they have
a charge. Replace them if necessary.
The remote may need to be paired to the transmitter.
To pair the transmitter:
A) Press the pairing button on the back of the
transmitter. Five lights on the transmitter keypad
(Zone 1, Zone 2, Source 1, Source 2 and the pairing
light in the front) will light up and begin flashing;
B) Stand 2’ - 4’ away from the transmitter with the
remote. Press and hold the Zone 2 key on the remote
for about 4 seconds. All lights will stop flashing, then
pairing is complete. In the event this does not work,
try again, beginning at Step A.
If the remote still does not operate, try pairing one
more time or contact us at www.iavlightspeaker.com.
To Next Page
Loading...
Need help?
General