33
Tech Support: (877) 591-2491
Where to put the transmitter?
Typically, the perfect place for your transmitter is near
your home entertainment system, if you have one.
If you don’t have a home audio system then you can
chose a place that is centrally located to the rooms
you will be transmitting the audio to. Remember the
range of the system is approximately 50’ radius circle
of the transmitter, so as long as the distance from the
transmitter to the farthest speaker in any direction is less
than 50’, the placement of the transmitter is up to you.
Note: There is a maximum of two transmitters in one
home and they need to be 25’ apart.
Attaching the remote wall bracket
1) Identify where on the wall you want the remote to
hang.
2) Place the remote in this position and mark a small
line in pencil where the top of the hanging bracket on
the remote hits the wall.
3) Mount the Remote Wall Hanging Bracket to the
wall using the two (2) supplied screws.
4) You are now ready to use the Wall Hanging
Bracket to keep your remote in an easily accessible
position as you enter or exit a room.
To Next Page
Loading...
Need help?
General