40
Tech Support: (877) 591-2491
Possible causes of interference with your
LightSpeaker
®
System
A) Metal studs, in fact any metal wall material, can
cause the signal to be diminished or lost. This may
also be a problem if your wall paper happens to be
a foil type or have metal fibers in it.
B) Microwave ovens, when operating, may degrade
or interrupt the signal from your transmitter. Usually
this will only be a problem for those speakers in close
proximity to the microwave. For best results, do not
locate the transmitter near your microwave.
C) Certain portable phones operating in the 2.4
Ghz range, wireless computer routers, and other
consumer electronics and toys using 2.4 Ghz may
cause interference when operated too close to either
the transmitter or the speakers.
To Next Page
Loading...