IBA ibaBM-DPM-S User Manual

ibaBM-DPM-S Manual
Issue 2.11
11
5 System requirements
5.1 Hardware
For operation:
 24 V DC, 1 A power supply
To set the device's parameters:
 Ethernet or USB connection to a PC or
 CompactFlash® card with CompactFlash® card reader
For measuring:
 IBM-compatible PC with the following minimum requirements:
 1 GHz Pentium III or better
 At least one free PCI slot (PC)
 At least 512 MB RAM
 4 GB free memory on the hard drive for measurement values
For further information on PC requirements, visit our homepage http://www.iba-ag.com
.
 At least one fiber optic input card of type ibaFOB-D
 One ibaNet fiber optic patch cable for connecting ibaBM-DPM-S and ibaPDA-PC.
 PROFIBUS DP network
Operation in redundancy mode:
 ibaBM-DPM-S firmware beginning with version B4 supports the redundancy mode
 Moreover, you need to get a license that is activated via the ibaBM-DPM-S Web in-
terface.
Note
Please contact iba AG for getting a license key for the redundancy mode.

IBA ibaBM-DPM-S Specifications

General

Brand	IBA
Model	ibaBM-DPM-S
Category	Recording Equipment
Language	English