Part 4. Upgrading and replacing hardware
This part contains information to help you add to or change the hardware that was
installed in your computer at the factory. It contains the following chapters:
• “Chapter 7. Preparing to upgrade” on page 7-1
This chapter contains information to help you plan and prepare to add or
replace adapter cards, drives, and system board components in your system
unit.
• “Chapter 8. Adding and removing adapter cards and drives” on page 8-1
This chapter contains instructions for working with adapter cards and drives.
• “Chapter 9. Adding and replacing system board components” on page 9-
1
This chapter contains instructions for working with the hardware components
on your system board.
To Next Page
Loading...
Need help?
General