BIOS Setup configuration
6-1
Chapter 6. BIOS Setup configuration
Your IBM Personal Computer is already configured for immediate use. You can view
your computer’s configuration settings using the Configuration/Setup Utility and the
Windows 98 Device Manager.
You can also use these configuration utilities to change some configuration settings.
For example, if you add or replace hardware inside your system unit, you might
need to verify or update specific settings. For information about working with your
system unit’s hardware, see “Part 4. Upgrading and replacing hardware”.
This chapter contains the following sections to help you reconfigure and optimize
your computer:
• “Configuration/Setup Utility overview” on page 6-2
• “Entering Setup” on page 6-4
• “Working with the Setup menus” on page 6-5
• “Setup parameters” on page 6-9
• “Using other configuration utilities” on page 6-21
To Next Page
Loading...
Need help?
General