To Next Page

To Previous Page

1-2

IBM Personal Computer User Guide

• “Chapter 3. Express Maintenance” on page 3-1

This chapter contains information about the Express maintenance service

available in some countries.

Part 3: Controlling system settings

This part contains information to help you configure or reconfigure the hardware and

hardware features that were installed in your computer at the factory. It includes the

following chapters:

• “Chapter 4. Getting started” on page 4-1

This chapter contains instructions for making adjustments to the monitor and

the system volume settings on your computer. It also provides information to

help you connect your computer to a printer or to the Internet.

• “Chapter 5. Power management features” on page 5-1

This chapter describes the software shutdown and suspend features of your

computer for more efficient power management. It also tells about the monitor

standby feature under Windows 98.

• “Chapter 6. BIOS Setup configuration” on page 6-1

This chapter provides instructions for using the Setup Utility, where you can

view or change your system’s configuration.

Part 4: Upgrading and replacing hardware

This part contains information to help you add to or change the hardware that was

installed in your computer at the factory. It contains the following chapters:

• “Chapter 7. Preparing to upgrade” on page 7-1

This chapter contains information to help you prepare to add or replace adapter

cards, drives, and system board components in your system unit.

• “Chapter 8. Adding and removing adapter cards and drives” on page 8-1

This chapter contains instructions for adding and removing adapter cards and

drives.

• “Chapter 9. Adding and replacing system board components” on page 9-1

IBM 2193 User Manual

Other manuals for IBM 2193