2. Carefully lift the front of the flat-panel display to the full upright position.
Attention: Do not extend the keyboard feet. The flat-panel display screen might be damaged if
the feet are extended when the display is closed.
3. Hold the keyboard near the keyboard tray and carefully route the keyboard-and-mouse cable down
through the keyboard tray cutout and up through the cutout that is behind the flat-panel display. (See
the illustration.) Carefully pull the cable through the cutouts.
4. Peel the backing of the double-sided foam tape that is preinstalled on the front of the console tray.
Installing the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted monitor and keyboard
5
To Next Page
Loading...
