Each FCoE port provides Ethernet connectivity with a nominal data rate of 10 Gbps (gigabits per second).
Each of the 1 Gb ports provides Ethernet connectivity at a data rate of 1 Gbps and is connected with
Ethernet cables. A 10 Mb data rate is not supported. Figure 50 shows the FC EN0J adapter.
Restriction: The 1 Gb Ethernet ports do not support data rates of 10 Mbps (megabits per second).
Specifications
Item Description
Adapter FRU number
00E3498 (Designed to comply with RoHS requirement)
Wrap plug FRU number
12R9314 (for Fibre LC connector)
10N7405 (for RJ45 connector)
I/O bus architecture
PCIe2 x8
Slot requirement
For details about slot priorities and placement rules, see the PCI adapter placement topic
collection for your system.
Cables
SR SFP+ optical fiber cables and Cat5 Ethernet cables
Voltage
3.3 V, 12 V
Form factor
Short, regular sized bracket, low-profile capable
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your
system.
Figure 50. FC EN0J adapter
Managing PCI adapters 153
To Next Page
Loading...
Need help?
General