IBM 8960-F64

Technical Specifications
Power supply specifications (per PSU)
Power
supply
model
Maximum
output
power rating
(DC)
Input voltage Input line
frequency
Maximu
m input
current
Input line
protection
Maximum inrush current
XBR-250WP
SAC-F
250 W 100 - 240 VAC
(nominal)
90 - 264 VAC (range)
50/60 Hz (nominal)
47 - 63 Hz (range)
3.5 A Line fused 50 A peak @ 240 VAC for <10
ms, 10 ms - 150 ms, <15 A
peak. 50 A peak @ 240 VAC at
cold start for <10 ms. 15 A peak
for cycles 10 ms - 150 ms. <3.5
A peak for >150 ms
XBR-250WP
SAC-R
250 W 100 - 240 VAC
(nominal)
90 - 264 VAC (range)
50/60 Hz (nominal)
47 - 63 Hz (range)
3.5 A Line Fused 50 A peak @ 240 VAC for <10
ms, 10 ms - 150 ms, <15 A
peak. 50 A peak @ 240 VAC at
cold start for <10 ms. 15 A peak
for cycles 10 ms - 150 ms. <3.5
A peak for >150 ms
Power consumption (typical configuration)
Model name
@100 VAC
@200 VAC
@-48 VDC input
Minimum number of
Notes
input input power supplies
166 W Not supported Not supported 1 Fully configured 48 ports with approved
Switch
375 BTU/hr
32-Gbps SWL optic sources and
loopback. Operate tests at maximum 32-
Gbps port speed and fans at nominal
speed.
Power consumption (maximum configuration)
Model name
@100 VAC
@200 VAC
@-48 VDC input
Minimum number of
Notes
input input power supplies
210 W Not supported Not supported 2 Fully configured all ports with MSA optic
Switch
375 BTU/hr
maximum wattage rating. Fans at high
speed.
Power consumption (idle configuration)
86 Hardware Installation Guide