Figure 10. Removing the RDX drive ller
b) Holding the clips, pivot the ller away from the disk drive backplane.
c) Lift the ller out of the system.
5. Unplug but do not remove the front drives and front llers if present from their slots. Pull the disk
drives and llers out far enough to prevent them from interfering with the removal of the disk drive
backplane as shown in the following gure.
Drive backplanes for the 9009-41A, 9009-41G, 9009-42A, 9009-42G, or 9223-42H
13
To Next Page
Loading...
